The two-hour delay is in place to account for defrost cycles. Sensors can be changed (by RCI) from the two-hour delay to immediate alarms for specific cases (i.e., sensors located near the IT rack).
For units in restaurants and grocery stores an alarm will not be immediately be issued when a temperature crosses the high threshold. An alert will only be sent out if the temperature remains above the set high threshold for two hours. This two-hour ...
Thresholds are positioned near the majority of the data to account for the two-hour delay in alarms, ensuring timely alerts if something goes wrong. If the thresholds are set too far from the data, an alarm might not be triggered in time to save the ...
The bottom right widgets in the location dashboard screen allow you to enter contact information to receive alerts about any device alarms. You can enter up to 4 contacts (emails & phone numbers). Ensure the “+1” is included before the phones area ...
No, the data points represent the temperature at that time. Sensors sample the temperature every minute and if the temperature is within the range of the set thresholds it then reports to the gateway every hour.
The sensors measure ambient air temperature, which can vary throughout a unit. In a cooler or freezer, temperature readings may differ depending on where the device is placed, such as near a door or a fan.